PRODUCT产品中心

产品中心
日本santest

日本SANTEST传感器、SANTEST位移传感器、SANTEST变位传感器、 SANTEST位置检出器、SANTEST定位传感器、SANTEST反馈传感器、 SANTEST液位计等全系列产品。 日本STC SANTEST公司有50多年的传感器生产历史,目前生产传感器有模拟输出型和数字输出型. 主要用于: 1.适用于所有传统的绝对方式变位传感器所使用的机器: 2.作为自动控制装置的位置反馈传感器使用. 3.作为机器人的机械手臂定位传感器使用: 4.多个近接传感器的替换: 5.木工机器,铜板的宽度测定,裁纸机,建材的测长,压力机的定位: 6.作为可内置的油压,空压汽缸内的变位传感器使用: 7.作为所有液体的高精度液位计使用. 产品系列有:SANTEST传感器 SANTEST控制器 SANTEST探针,SANTEST探头 1. 高性能模式:GYcRP GYcRP GYcRS GYMR5 2. 小外罩系列:GYMT GYPM GYMS GYGS 3. 高温型模式:GYcRP-H GYHR 4. 多功能型式:GYcAT GYLT/GYLS GYLT-T/GYLS-T GYAF 5. 线性传感器:GYKM GYKM-LT/LS 6. 防爆功能器:IGY3 EX-GYdS EX-GYdT 7. 防水功能型:GYC**-****-**2G** IP-** 8. 高精度型,特殊型等等。。。 常用型号有:GYKM-LT-100-BD-RS GYKM-LT-200-BD-RS GYKM-LT-300-BD-RS GYKM-LT-400-BD-RS GYKM-LT-500-BD-RS GYKM-LT-100-BD-RL GYKM-LT-200-BD-RL GYKM-LT-300-BD-RL GYKM-LT-400-BD-RL GYKM-LT-500-BD-RL GYcAT-1300-7SGNil GYcAT-1400-7SGNil GYcAT-1500-7SGNil GYcAT-1700-7SGNil GYcAT-1800-7SGNil GYcRS-1300-7SGNil GYcRS-1400-7SGNil GYcRS-1500-7SGNil GYcRS-1700-7SGNil GYcRS-1800-7SGNil GYcRS-1300-7SGG GYcRS-1400-7SGG GYcRS-1500-7SGG GYcRS-1700-7SGG GYcRS-1800-7SGG GYKM-600-NL-T GYKM-700-NL-T GYKM-800-NL-T GYKM-900-NL-T GYKM-1000-NL-T GYKM-600-NL-U GYKM-700-NL-U GYKM-800-NL-U GYKM-900-NL-U GYKM-1000-NL-U GYCAT-1500-CD-N、 GYCAT-1700-BR-M、GYCAT-670-BR-M-G、GYCAT-345-BR-M、GYCAT-1000-BR-M、GYCAT-2060-BR-M、GYCAT-4-600-BD-M-M0、GYLS-50-AD-M-220、GYLS-150-D-M-S、GYMS-800-N-CN,STC SANTEST阀门定位器:GYCRP-40-HO SERAL 25615P 0Z10,STC SANTEST阀位传感器: ICY3-P-2C-HM-1-770等产品类型。

 

The GYSE-probe is an all-in-one type sensor with positional
resolution up to 1μm.
Positon output is Analogue, SSI, or Incremental.
Velocity output (option) is avaiable for Analogue type.
The positonal difference between 2 magnets can be observable
as well.
This allows quick and easy sensor cartrige replacement.
Sensor parameters (zero, full-scale or range) can be adjusted by
using the Windows programming software (ISO9141).

Specifications

Non-linearity < ±0.025%FS (Min.±50μm)
Resolution 16bit (1/65536)
Repeatability ±0.001%FS (Min.±3μm)
Temp drift ±20ppmFS/°C
Output Analogue
Position output (Standard) 0-10V
(output current:Max.5mA, load:Min.2kΩ)
Or 4-20mA (load:Min.500Ω)
Velocity output (Option) ±10V or 4-20mA / Resolution:16bit (1/65536)
Alarm output Open drain 50V 0.1A (Alarm signal for lost magnet)
Power supply +24 (±2) VDC (80mA)
Frequency response Std 1kHz (depending on stroke) sampling
Admissible press. 35MPa (probe rod)
Operating Temp -20°C-+80°C
Storage Temp -40°C-+80°C
Vibration 15G (10-2000Hz)
Shock 100G (2msec)
Protection IP67 (Connecting mount or Pigtail type)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Effective stroke
15mm-5200mm

(2):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF-3A

(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14Φ13.8

(4)Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
For CN type, only counter connector supplied.
In case extra cable needed, specify the length.

(5):Analogue position output (OUT1)

AD 0-10V (Standard)
AR 10-0V
BD 4-20mA
BR 20-4mA
CD or CR□□
bipolar output
[ex]
CD10
CR05
□□V-□□V

-10V-+10V
+5V--5V
V Z/F
[ex]
V1/5
V9.5/0.5
Custom order
1-5V
9.5-0.5V
I Z/F
[ex]
I5.12/20
I20/5.38
Custom order
5.12-20mA
20-5.38mA
*Z=Zero positon
*F=Full scale position

(6):Option:Analogue output (OUT2)
Position:see (5)
Velocity output (Note)
VA[ ] ±10V
WB[ ] 4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity=9.99mm/sec)
N:No option

(Note)
VA:when magnet stops, output is 0V. when moving toward probe tip, +10V
WB:when magnet stops, output is 4mA. when moving in any direction, 20mA.

Dimensions

 

Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2Y.
Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, Option:L type)

 

GYcRS and GYcRP probe uses RS-422 differential line drivers
signal transmission of which advantage is the noise free transmission
with a simple interface.
In combination with GYDC-05 controller, GYcRS probe has
achieved high resolution of 1μm.
GYcRP probe is available for high temperature ambient (200°C) and
SRT (Shock Resistant Technology) options.

Specifications

Non-linearity < ±0.025%FS TYP
Resolution (anaoglue) (digital) 16bit (with GYHC) / Min.1μm (with DC05)
Repeatability < ±0.01%FS
Temp drift < ±20ppmFS/°C
Admissible press. 35MPa (probe rod)
Operating Temp -20°C-+80°C
Storage Temp -40°C-+80°C
Vibration 6G (40Hz2mmPP)
Shock 100G (2msec)
Protection IP65
Cable length 1.5m (Standard) (Option Max.200m)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Resolution depends on the controller combined.

Model No.

(1):Effective stroke
15mm-5200mm

(2):Thread
M:M24xP1.0 (Std)
N:M18xP1.5
U:3/4-16UNF

(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8

(4):Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)

Combined controller
Analogue output type:GYHC, GYFC2
Digital output type:GYDC-05
With LED Display:GKS-01 (only GYcRS)

Dimensions

 

Material probe head:Al diecast, probe rod:SS304
(GYcRP probe) Standard magnet:No.2P Other magnets are available from Magnet Grouping [B].
(GYcRS probe) Standard magnet:No.2PN Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic)

In case of using probe only,
probe outputs digital signals (start/stop) using RS422 differential
line drivers. In response to user's interrogation (start) pulse, probe
provides stop pulse.

 

电 话
地 图
分 享
邮 件