|
意大利TRAMEC减速机
|
|
|
X系列螺纹减速机,
H系列螺纹减速机,
K系列螺纹减速机,
XX系列螺纹双联减速机,
KX系列螺纹双联减速机,
KK系列螺纹双联减速机,
T系列斜螺旋减速机,
Z系列平行齿轮轴产品,
P系列轴安装变速箱,
|
M系列轴安装变速箱,
R系列直角变速箱,
RL系列直角变速箱,
REP系列精度行星减速机,
EP系列标准行星减速机,
GN系列带尼龙圈弹性联轴器,
VSF.2 USC系列输出双联螺纹减速箱,
N系列速度振动器.
|
单级<15 arcminutes 速比系列为3,4,5,7,10
双级<20 arcminutes 速比系列为9,12,15,16,20,25,28,35,40,50,70,100
单级<15 arcminutes 速比系列为3,4,5,7,10
双级<20 arcminutes 速比系列为9,12,15,16,20,25,28,35,40,50,70,100
单级<15 arcminutes 速比系列为3,4,5,7,10
双级<20 arcminutes 速比系列为9,12,15,16,20,25,28,35,40,50,70,100
精密的磨齿技术行星齿轮 采用超精密衍磨，使齿轮间配合更加优化。实现低背隙、低噪音、更增加齿轮的使用寿命
先进的表面处理工艺渗氮钢机壳，增强环境耐受性、耐腐蚀性
严格的监测流程 TRAMEC公司为每一台减速器提供精密数据，确保应用系统的高可靠性
模块化的法兰和轴衬设计 适用于任何厂商和形式的电机
良好的密封设计 长寿命润滑剂无需维护 REP型减速器的技术参数 TRAMEC制造的REP系列行星齿轮减速机具有极高的工作精度及可靠性。 比EP系列精度更高. 单级<4 arcminutes 速比系列为3,4,5,6 双级<6 arcminutes 速比系列为9,12,16,20,24,30,36 三级<8 arcminutes 速比系列为27,36,48,64,80,100,120,144,180,216
高效率(<=97%)，大扭矩(<=450Nm)
RIGHT ANGLE GEARBOXES
SERIES R
.jpg)
Built in five sizes with three types of output shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed opposite the input shaft.
Three input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes consists of two GLEASON spiral bevel gears with precision ground profile, 16CrNi4 or 18NiCrMo5 UNI7846 steel.
The use of high-quality tapered roller bearings on all shafts (except for the input sleeve on the compact motor coupling, which is supported by angular ball bearings) ensures long life, and enables very high external radial and axial loads.
RIGHT ANGLE GEARS
SERIES RL
.jpg)
RL Series right-angle drives are designed for industrial applications where rotary power must be transferred between two shafts at right-angles to each other. RL series units are available in 6 different sizes with 2 or 3 outputs and with 1:1 or 1:2 transmission ratios
PARALLEL GEAR SHAFT UNITS
SERIES Z
(3)(2).jpg)
Built in 6 sizes with single reduction stage, in 6 sizes with two reduction stages and in 6 sizes with three reduction stages.
Two input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint).
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 (71-180) or spheroidal graphite cast iron EN GJS 400-15U UNI EN 1563 (200-225). It is ribbed internally and externally to guarantee rigidity it is machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.
The helical spur gears are built in 16CrNi4 or 18NiCrMo5 UNI7846 quench-hardened and case-hardened steel. The first stage is ground.
The use of high-quality tapered roller bearings on all shafts ensures long life, and enables very high external radial and axial loads.
The standard hollow output shaft made of steel (shrink disc available on request), the option of mounting an output flange on the side opposite to the input shaft the possibility of mounting a backstop device make these gear units extremely versatile and easy to install.
.gif)
PRECISION PLANETARY GEARBOXES
SERIES REP
(2).jpg)
Our gearboxes are manufactured for prevailing utilization in the following applications:
- Machine tools
- Machines for woodworking
- Transfer machines
- Printing machines
- Automatic machines for packaging
- Automation
- Mechanical hands
- Silk-screen process machines
- Linear guides
The REP series is available in 4 sizes (075, 100, 125 and 150), with 1, 2 or 3 reduction stages, with two or three types of output shaft (AU...) and two types of output flange (FLT and FLQ).
Housing: made of special nitrided steel to assure strength, high reliability and long life.
Flanges: input and output flanges made of aluminium and available in several versions.
Shafts: made of hardened and tempered alloy steel.
Gears: made of casehardened and tempered alloy steel, with ground toothing.
Bearings: high quality and suitably sized to assure long life and noiseless working.
MOTOINVERTER
SERIES MOTOINVERTER
.jpg)
Drivemot – Asynchronous Motors with Integrated Inverter
Voltage = Single/Three-Phase 230V – Three-Phase 400V
Power = 0.10 – 22 KW
Control Method: V/F - Sensorless Vector EMC
Filter = Integrated
Communication Protocols = *CanOPEN – Modbus RS485 – *Profibus-DP
* = Optional
MOTORS - DRIVE BRUSHLESS
SERIES BRUSHLESS
.jpg)
Motors/Drive Brushless
Voltage = Single-Phase 230V – Three-Phase 400V
Stall Torque = 0.2 – 115 Nm
EMC Filter = Integrated
Communication Protocols = CanOPEN
IBD – Integrated Brushless Drive
Voltage = 310 ÷ 750 Vdc
Stall Torque = 2.8 – 16 Nm
Communication Protocols = CanOPEN – EtherCAT
